Cliff & Bunting 3” Scale Traction Engine

This site is designed to assist those wishing to build a Cliff & Bunting Traction Engine.
 
HomeHome  ­FAQFAQ  ­SearchSearch  ­RegisterRegister  ­MemberlistMemberlist  ­UsergroupsUsergroups  ­Log inLog in  
Cliff & Bunting 3” Scale Traction Engine :: Construction :: General ConstructionShare | 
 

 Lifting Link and D Valve - assistance sought

View previous topic View next topic Go down 
AuthorMessage
rbrett



Number of posts: 14
Localisation: Vermont South, VIC, AU
Registration date: 2007-07-03

PostSubject: Lifting Link and D Valve - assistance sought   Sat Apr 18, 2009 4:01 pm
From: bettyp
Posted: Tue Apr 14, 2009 9:00 pm
Subject: lifting link and D valve

Greetings to all C&B builders I am a new member and new at computing. I would appreciate help with lifting link and d valve. I just cant get D valve to match TDC and BDC and open correctlly can you help? The d valve always seems to be 2mm behind the piston rod in both directions. the
eccentric is set 180* opposite crank. any ideas? this is driving me mad.

[Above message passed on to wider community to help solve]
Back to top Go down
View user profile http://www.rbrett.id.au
 

Lifting Link and D Valve - assistance sought

View previous topic View next topic Back to top 
Page 1 of 1

Permissions of this forum:You cannot reply to topics in this forum
Cliff & Bunting 3” Scale Traction Engine :: Construction :: General Construction-